Course manual 2017/2018

Course content

GIS and RS include a powerful set of computational techniques and methods for storing, retrieving and analysis of spatial and temporal distributed geographical data. Techniques will be introduced to analyze environmental problems. 

Study materials

Practical training material

  • Published on Blackboard

Software

  • ArcGIS, ERDAS IMagine, eCognition

Other

  • Module tutorials, data sets, Literature and references will be published on Blackboard.

Objectives

After this course the student:

  • Has in-depth theoretical knowledge and overview of GIS and Remote Sensing science.
  • Has advanced practical skills with ArcGIS, ERDAS and/or eCognition software.
  • Can apply advanced GIS and RS techniques for the analysis of processes and patterns in geo-ecosystems.

Teaching methods

  • Self-study
  • Lecture
  • Computer lab session/practical training
  • Supervision/feedback meeting

 

Lecture: 2 hours introduction, general course set-up, content and some theory on remote sensing.


Computer practical / laptop self-study: dates according to the official course schedule, students are free and encouraged to work on their own computer at UvA or home (laptop or desktop), within the projected period (April). Students are free to work during other days in the GIS-studio, within the projected period (May - June). Make a reservation system via: https://www.gis-studio.nl/index.php?page=reservations.

 

Literature and additional info: There is – in most cases - a literature folder to each module in which literature or information is stored important for that module. It is your responsibility to read and go through the information, it might well help you understand the world of GIS and Remote Sensing. For technical problems you may consult the help function of ArcGIS and ERDAS and eCognition, as well as literature available on the internet. E.g. ‘Google’ your problem and find the related topic with, in most cases, solutions. Also consult fellow students on the course.


Modules: A set of 24 modules is offered of which 15 modules should be finished before the deadline. For detailed descriptions of the modules content, see further in this course manual. Most modules are accompanied by a test, which should be handed in via Blackboard.

 

Progress meetings: each week there will be a possibility to communicate progress with the teachers, in principal on the first or last regularly planned practical session. In principal Thijs/Harry are ~1 hour/day available in the GIS studio/their room for  guidance/practical help. Emailing the lecturers is also a possibility.

Learning activities

 

Activity

Amount

Mean hours

Total

 

Lecture

1

2

2

 

Module assignments

15

8

120

 

Extra reading

6

4

24

 

Total

 

 

146*

 

 

Note* this is less than the official 168 hours for the course. Two days are official holidays, leaving us 18 full days = 144 hours. Due to the fact that this a computer practical, we decided not to plan any self-study for the evenings/weekends etc., leaving you with a lower study load than originally planned for practical reasons. 

Attendance

The programme does not have requirements concerning attendance (OER-B).

Additional requirements for this course:

 

You have the opportunity during the period between April 3 and April 26 to use the computers in the GIS-studio. We made collective reservations in the GIS-studio for you already. If you need additional reservations, you can do so via http://www.gis-studio.nl, see separate paragraph on GIS-studio regulations, near the end of this course manual. Thijs de Boer  w.m.deboer@uva.nl), manager of the GIS-studio, can provide you with necessary information. Within this period you are welcome to finish the course, perhaps earlier than the deadline. The course is self-tuition, which means minimum contact with the coordinator/teacher, because the modules are self-explanatory. In summary, you do not need to be present in the GIS-studio, if you use the eCognition software (only available in GIS-studio) then a computer there is necessary. For ArcGIS and ERDAS  Imagine student licenses are available. Contact Thijs de Boer for this.

Assessment

Item and weight Details

Final grade

100%

Module assignments

Must be ≥ 5.5

 

Grading scheme, deadlines for students of this year:

Activity Deadline Weight Minimum grade Resit
15 Module assignments via tests on Blackboard

April 26, week 17

 

(if modules are handed in after this deadline, the student is graded with 'NAV' and automatically has a resit)

100%

5.5

 

(all individual module grades should be graded with 5.0 or higher)

July 2, 2018

 

 

Grading scheme, deadlines for students from previous year

Activity Deadline Weight Minimum grade Resit
Module assignments April 26, week 17 40% 5 July 2, 2018

Project:

- GIS/RS work

- Report

 

 

April 26, week 17

April 26, week 17

 

 

30%

30%

 

 

5

5

 

July 2, 2018
Remarks   100% 5.5 5.5

 

Inspection of assessed work

Contact the course coordinator to make an appointment for inspection.

Assignments

01 "Getting Started with GIS" Virtual Campus

  • This is a standard online Virtual Campus e-learning module provided by ESRI on their e-Learning training website – you will receive an e-mail with all of the details needed at the start of the course. It provides an overview of ArcMap and where the buttons are… Admission (on a personal basis) via E-Mail from ESRI, on behalf of the Course Coordinator. After you finished this e-module, you should upload your certificate of completion (.PDF file) to Blackboard.

     

02 Natural Hazards (Earthquake Visualization) (ArcGIS)

  • Earthquakes are destructive tectonic hazards that occur all over our world. But why do earthquakes occur more often in some places than in others and what does "magnitude 6.8" really mean? You will be working and visualizing and explain how earthquakes relate to plate boundaries in a GIS through: a. Query earthquake attributes to reveal how depth and magnitude relate to spatial location, b. Create a report of countries affected by tsunamis, a secondary earthquake hazard, c. Map earthquake faults to determine plate interaction, d. Visualize earthquake data in 3D, e. Map earthquake data and local geology to determine seismic hazard.

     

03 Spatial Data Preparation (ArcGIS)

  • This module introduces you to preparing spatial data in ArcGIS, so that you can efficiently organize and carry out a GIS project. The term ‘spatial (or geospatial) data’ is also known as geographic information and describes features or boundaries on Earth (or any other planetary body). Spatial data are frequently stored as coordinates and are visualized through maps, which can be accessed, manipulated and analyzed in a Geographic Information System, such as ArcGIS. You will use images made by André Kuipers made from the International Space Station (ISS) in 2012.

     

04 Building a Geodatabase (Hawaii I) (ArcGIS)

  • This assignment consists of two chapters:
    1) Introduction: a text about the theory on geodatabases, based on the Help of ArcGIS.
    2) A case study exercise, written by the staff of the GIS-studio. You will try to find the most ideal areas for growing coffee beans on the ‘Big Island’ of Hawaii.

     

05 Spatial Analyst Model (Hawaii II) (ArcGIS)

  • This assignment is a follow-up of the previous module and consists of three chapters:
    1) Introduction: a text about the theory on Spatial Analyst, an extension to ArcGIS, based on the Help of ArcGIS. Read this text carefully and study the illustrations.
    2) A tutorial, based on the ESRI module ‘The ArcGIS Building a Geodatabase Tutorial’. This tutorial supports a practical introduction to geodatabases.
    3) A case study, written by the staff of the GIS-studio. You will try to find the most ideal areas for growing coffee beans on the ‘Big Island’ of Hawaii with the help of Model Builder in ArcGIS.

     

06 Surface Creation and surface analysis (ArcGIS)

  • A variety of methods can be used to model the surface of a feature or a phenomenon. Surfaces are for example Digital Terrain Models or a rainfall map. This module introduces you to two surface-creation techniques: interpolation and density. You can use interpolation to model the surface – the Digital Terrain Model (DTM) of a feature or a phenomenon—all you need are sample points, an interpolation method, and an understanding of the feature or the phenomenon being modeled. The idea behind interpolation is simple: estimating unknown values using a sample of known values. Although certain methods of interpolation (such as inverse distance weighted – IDW - and Spline) solve this problem differently, they each work with the same underlying principle, called spatial autocorrelation. Density functions, on the other hand, allow you to see the highest and the lowest concentrations of features in your data. In density surfaces, the cell values always indicate the number of features per unit of area, such as the number of people per square mile. Density surfaces are great for visualizing patterns in the data that otherwise might not be apparent.

     

07 Path Distance Calculations (Ecoducts) (ArcGIS)

  • In the 1990 Natuurbeleidsplan (Nature Policy Plan), the problems of many very shattered nature areas in the Netherlands (in Dutch: ‘versnippering’) were recognized, and the Ecologische Hoofdstructuur van Nederland (EHS) (National Ecological Network) was introduced. Its aim is to connect the main wildlife areas in the Netherlands by the year 2018. As a result, an overpass for animals, the ‘Natuurbrug’, has been built near Hilversum (www.natuurbrug.nl). This was one of the first major nature development projects for the new EHS. This overpass - the longest in the country - creates an ecological corridor between the habitats of the ‘Utrechtse Heuvelrug’, the central wildlife areas in ‘Het Gooi’, and the ‘Vechtstreek’. You will simulate the location of the Ecoduct in ArcGIS.

     

08 Hydrological Analysis (ArcGIS)

  • In this module you will learn how to automatically extract a hydrological stream network from a digital elevation model and compare this to a traditional stream network digitized from a paper topographical map. ArcGIS is a powerful platform for the modeling of hydrological processes and extracting hydrological features. An important dataset for hydrological modeling is a digital elevation model (DEM). Delineation of watersheds and sub-catchments and extraction of the hydrological stream network can be calculated from a DEM. Based on this stream network, various hydrological parameters can be calculated and flow tracing can be carried out. In this module you will explore some of the techniques and tools available in ArcGIS.

     

09 Web services (WMS and WFS) (ArcGIS)

  • This module introduces you to preparing spatial data in ArcGIS, in order to efficiently make use of the possibilities to attain spatial data on the internet. The term ‘spatial (or geospatial) data’ is also known as geographic information and describes features or boundaries on Earth (or any other planetary body). Spatial data is frequently stored as coordinates and is visualized through maps, which can be accessed, manipulated and analyzed in a Geographic Information Systems environment, such as ArcGIS. Spatial data is more and more present on the internet and is often presented in the form of Webservices. Webservices we will focus on are Web Mapping Services (WMS) and Web Feature Services (WFS).

     

10 Refresher ArcGIS

  • This module is a refresher into ArcGIS. Students attending this course have GIS pre-knowledge, but that could have been a while ago… In this module you will work with a series of datasets from the Netherlands - the TOP10vector, The Algemeen Hoogte Model (Digital Elevation Model, AHN2 5m), the Geomorfologische Kaart van Nederland (Geomorphological Map, GKN50), the Bodemkaart van Nederland (Soil map, BKN50) and the Geologische Kaart van Nederland (Geological Map, GK50). You will use ArcCatalog, ArcMap, and some of the ArcToolbox programs in order to efficiently store, manage, analyze and display geospatial data in a correct manner. In addition, there is a raw point measurement map of electrical conductivity that you will use to interpolate subsurface conductivity in relation to sand thickness.

     

11 3D air photo interpretation using ERDAS Imagine 2015

  • The goal of this exercise is to understand natural processes in a coastal ecosystem from panchromatic
    stereo aerial photographs using anaglyph imagery in ERDAS, and:
    - To apply Air Photo Interpretation elements (API’s) in coastal areas.
    - To interpret and analyze API’s for the reconstruction of the local landscape development.
    - To evaluate the area in qualitative terms for its potential for generating drinking water.

     

12 Flood hazard analysis Bangladesh (ArcGIS)

  • In this exercise you will use multi-temporal SPOT XS satellite imagery using band ratio analysis to evaluate flood hazard in the confluence area of the Rivers Ganga and Jamuna in Bangladesh, Southwest of the capital city Dhaka. In this area river dynamics are enormous. River channels may change their position over several kilometers within only a few years. You will evaluate the potential flooded areas covered during three periods:
    1. During a dry season, based on a SPOT image from 9-1-1987.

    2. During a moderately severe flood, based on a SPOT image from 7-11-1987.
    3. During a severe flood, based on a SPOT image from 10-10-1988.

     

13 Vegetation Indices Burkina Faso, Remote Sensing (RS) module with ERDAS

  • The Normalized Differential vegetation Index (NDVI) can be used to compare remote sensing images of different dates to study vegetation change. Vegetation indices (VI’s) are usually calculated and used as a quantitative measure to assess vegetation conditions from remote sensing images. Many studies have shown that VI’s are related to biophysical parameters, such as Leaf Area Index (LAI), canopy cover, biomass, and more. Hence, we can use VI’s to detect spatial and temporal vegetation change. We will use the NDVI to illustrate the use of a VI in Burkina Faso. Burkina Faso – to the south of the Sahara – shows particular gradients.

     

14 China - Land Use Land Cover (LULC) Classification, Remote Sensing (RS) module with ERDAS

  • Landsat satellite images will be processed from which land use and land cover (LULC) will be classified, with a focus on urban sprawl in relation to agriculture. Satellite images from two dates (1979 and 2007) are classified and compared to quantify and visualize urban sprawl / LULC change. The area selected is in northeastern China, near Shenyang city, the capital city of the province Liaoning. See also https://en.wikipedia.org/wiki/Shenyang

     

15 Predicting Hummingbirds Andes

  • In this exercise you will create distribution maps for two species of hummingbird that occur along the Ecuadorian Andes: Metallura tyrianthina (Tyrian Metaltail), and Metallura baroni (Violet-throated Metaltail). We will use two different approaches to determine where along the Andean ridge of Ecuador these species are likely to occur. This module takes more time and insight from the student and will be weighted twice as strong as the other modules. Time average spent on this module: 2-2.5 days. You may regard this as an own project and we will be happy to receive alternative and challenging, innovative solutions.

     

16 Mapping Impervious Surfaces in eCognition

  • The concept behind eCognition is that important semantic information necessary to interpret an image is not represented in single pixels, but in meaningful image objects and their mutual relationships. The basic difference, especially when compared to pixel-based procedures, is that eCognition does not classify single pixels, but rather image objects which are extracted in a previous image segmentation step. You will be introduced into this new method by classifying impervious surfaces – however, keep in mind that you can, and will, apply this technique to other remotely sensed imagery. For this module you do not need to hand in any answers, but you are expected to finalize this module. Reserve a computer in the GIS-studio!

     

17 Image segmentation and classification in eCognition

  • Should be done after module 20! Based on that module you will classify a SPOT image of the Luxembourg area using object-based image segmentation and classification techniques. Remember you may have finished a pixel-based ERDAS classification module earlier using the ERDAS software, from the area in China.

     

18-20 Managing LiDAR – 3 separate Virtual Campus (e-learning) modules

  • - 18 Managing LiDAR data using LAS datasets
    - 19 Managing LiDAR data using Mosaic datasets
    - 20 Managing LiDAR using Terrain datasets

     

    These modules are offered by ESRI – they introduce you to the latest developments in handling LiDAR Data and Point Cloud Data. For these modules the following ‘rules’ apply:


    1. You will receive an invitation email to join the ESRI Training programme.


    2. After accepting via the 'Get Started' button, you are prompted to login to your Esri Account or create an Esri Account if you do not already have one.


    3. After logging in, your Esri Account is connected to your organization (the UvA) in My Esri and access to all the e-Learning modules is enabled.


    4. You should go to the Training website / catalog list, and find the web-based e-Learning module "managing LiDAR using LAS datasets" and start learning.


    5. Each e-learning module has an exam to pass the course: your ESRI course certificate of completion is added to your Training records. Hand in this ESRI certificate (a .PDF file) in the "Hand-in assignments" area under the appropriate area on Blackboard.

     

21 Building Models for GIS Analysis Using ArcGIS 10

  • Basic ESRI Campus module on model building. Instructions as in the managing LiDAR modules.

     

22 Basics of Python

  • Basic ESRI Campus module on using Python language in ArcGIS. Instructions as in the managing LiDAR modules.

     

23 Hyperspectral image analysis

  • Conventional multi-spectral remote sensors, such as the Landsat Thematic Mapper and SPOT multispectral data, record data within only a few relatively broad wavelength bands. These broadband systems can only discriminate general material types and land cover units at the earth surface. As more experience is obtained with the use of multi-spectral images, more detailed information can be extracted from remotely sensed imagery. Hyperspectral sensing meets this demand exactly.

     

24 Radar Remote Sensing

  • Most optical remote sensing methods make use of the visible EM spectrum. This works quite well in cloudless areas, but within equatorial areas cloud cover could result in bad quality images with low visibility. In this module radar remote sensing is introduced, radar waves have a much longer wavelength (1mm-1m) and can therefore penetrate clouds. This technology is therefore interesting, especially for areas with high cloud cover throughout the year such as tropical rain forests. An example is presented from Indonesia.

     

Module descriptions and 'track' descriptions

The assignments are selected from a set of individual self-learning teaching modules, mostly designed by IBED staff members. The modules should be finished, preferably in the order as listed below: each module will take you (mean) a full day to finish. Within this course, the student will be able to progress along 2 possible ‘tracks’:

  1. Modules for student with no or limited GIS/RS knowledge.
  2. Modules for student with pre-knowledge of GIS/RS.


Some modules, mainly because of their innovative character, are available in both ‘tracks’. Make sure to communicate in an early stage with the teachers which ‘track’ you follow. The available modules are listed below. Modules 1- 8 are only for students without any pre-knowledge of GIS and RS, 9-14 & 18-22 for both student, and 15-17 & 23-24 for students with pre-knowledge.

 

Take notice:

  • If you are starting without previous knowledge (‘track 1’): finish the first 14 modules (01 – 14, in that order) and select 1 additional module from the modules 18-22.
  • If you have pre-knowledge (‘track 2’): make modules 10 – 17 first, then proceed with modules 9 and 18-22, and modules 23 and 24 (= total 14), and select 1 more module from the free ESRI Campus (e-learning) modules from their website.

 

Fraud and plagiarism

The 'Regulations governing fraud and plagiarism for UvA students' applies to this course. This will be monitored carefully. Upon suspicion of fraud or plagiarism the Examinations Board of the programme will be informed. For the 'Regulations governing fraud and plagiarism for UvA students' see: www.student.uva.nl

Timetable

The schedule for this course is published on DataNose.

Additional information

Getting started in the GIS-studio of IBED

Computers

The computers should be turned off after your work is done. Also the monitors can be turned off.

 

GIS accounts

To use the computers you need an account and a password. Staff, postgraduates and PhD students of IBED can use their own (UvA-) account. Students enrolled in a course can use their student login name or number. If you do not have a login name or number, you will receive a guest account from the staff of the GIS-studio.

The account information looks as follows:

  • User name:     g-gis10-fnwi (example)
  • Password:      XMu1JI5t (example)
  • Log on to:        UVA

This account information is computer-generated and is personal. However, the password is also known to the staff of the GIS-studio. Do not change this password!! Otherwise we will not be able to help you when you forget or lose your password !

 

Network drives

After you have logged in and have opened My Computer on your desktop you might see:

  • Hard Disk Drives segment with System (C:)  do NOT use drive C; is it is meant for programs!
  • and one other hard drive, usually named the (D:) drive.
  • Devices with Removable Storage segment with your USB-ports, etc.
  • Network Drives segment normally with two drives: fnwi-public and - for example - g-gis10-fnwi.

The network drives fnwi-public and g-gis10-fnwi are your shares on the FNWI-server. From these shares a back-up is made every night. This is not the case for the local drives (C:), (D:) and (E:).


g-gis10-fnwi (for example) is your personal share and is used to store your profiles (preferences, short cuts on your desktop, personal documents, etc.) so you are not dependent on a specific computer. Any GIS computer in the GIS-studio that you log in to with your account will connect to your personal share and open your profiles. This personal share has a default capacity of 10 Gb which is enough for most GIS and RS purposes.

 

On Blackboard you can find the exercises, examples, tutorials and manuals that you will need. Of course you have read/write access to your personal share on the network so you can copy the files that you have worked on and want to keep for later use to this share (and be assured of a back-up). You MUST first copy the module files that you need to a self-named folder (usually with your name in it) to the D drive.

 

A normal working scheme is as follows: 

Locate the files you need from Blackboard and copy them to a new self-named folder (usually with your name in it) on the local D-drive (NOT on the C-drive !).

  1. While working always open and save your files from/to this local folder.
  2. Before you log off copy your files to your personal share in order to be sure that a back-up is made. Any data left on the D drive can be deleted at any time!

 

Printing

There is an printer in the IBED pantry (red block with also a kitchen and toilets). See the whiteboard in the GIS-Studio for information on how to connect to this printer.

 

Tutorials 

Tutorials for ArcGIS can be found on the ArcGIS Resource Center: http://resources.arcgis.com/en/help/

Another fine reference is the online Help system in ArcGIS. It is located under the Help menu. There are two options:

  1. The ArcGIS Desktop Help provides a wealth of information on using ArcGIS.
  2. The ArcGIS Desktop Resource Center provides access to Web-based Help, online data, and key support services for ArcGIS Desktop.

 

Software

  1. ArcGIS installation on own computers:
    Students can get a one year’s license for ArcGIS, see for the procedure: http://www.gisstudio.nl/index.php?page=software.
  2. ERDAS installation on own computers:
    Students can get a one year’s license for ArcGIS, see for the procedure: http://www.gisstudio.nl/index.php?page=erdas.
  3. eCognition software is only available in the GIS-studio.

Contact information

Coordinator

  • dr. A.C. Seijmonsbergen

Room C4.204 (tel.: +31 20 258137)

h ttp://www.uva.nl/en/profile/s/e/a.c.seijmonsbergen/a.c.seijmonsbergen.html

Staff

  • dr. W.M. de Boer